Bosch GWX 18V-10 PC Professional Notice Originale page 22

22 | English
medical devices, petrol stations, chemical plants,
areas with a potentially explosive atmosphere or in
blasting areas. Do not use the power tool with
®
Bluetooth in aircraft. Avoid using the product near
your body for extended periods.
®
The Bluetooth word mark and logos are registered trade-
marks owned by Bluetooth SIG, Inc. and any use of such
marks by Robert Bosch Power Tools GmbH is under li-
cense.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended use
The power tool is intended for cutting, roughing and brush-
ing metal and stone materials, as well as making holes in
stone materials using diamond core cutters, without the use
of water.
A special protective guard for cutting must be used when
cutting bonded abrasives.
Sufficient dust extraction must be provided when cutting
stone.
With approved abrasive tools, the power tool can be used for
sanding with sanding discs.
The power tool must not be used to grind concrete.
®
With the Bluetooth Low Energy Module GCY 30-4 inserted,
power tool data and settings can be transferred between the
power tool and a mobile device by means of Bluetooth
less technology.
Product features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Unlocking lever for protective guard
(2) Direction of rotation arrow on housing
Technical data
Angle grinder
Article number
Rated voltage
A)
Rated speed
No-load speed
Max. grinding disc diameter
Kickback stop
Restart protection
Speed preselection
1 609 92A 5W4 | (13.07.2020)
(3) Lever
(4) LED work light (GWX 18V-10 PSC)
(5) User interface (GWX 18V-10 PSC)
(6) On/off switch
(7) Cover for GCY 30-4 Bluetooth
A)
(8) Battery
(9) Battery release button
(10) Auxiliary handle (insulated gripping surface)
(11) Protective guard for grinding
(12) X-LOCK grinding disc/flap disc
(13) Protective guard for cutting
(14) X-LOCK cutting disc
(15) Handle (insulated gripping surface)
(16) X-LOCK holder
A)
(17) Hand guard
(18) X-LOCK backing pad for fibre discs
(19) X-LOCK fibre disc
(20) X-LOCK clip for fibre discs
(21) X-LOCK cup brush/disc brush
(22) X-LOCK diamond core cutter
(23) Button for battery charge indicator (GBA 18V...)
(24) Battery charge indicator (GBA 18V...)
(25) Button for battery charge indicator (ProCORE18V...)
A)
(26) Battery charge indicator (ProCORE18V...)
(27) Extraction guard for cutting with a guide block
(28) X-LOCK diamond cutting disc
(29) Battery charge indicator (user interface)
(30) Speed preselection level indicator (user interface)
®
wire-
(31) Speed preselection button (user interface)
(32) Power tool status indicator (user interface)
(33) Overload protection indicator (user interface)
(34) Unlocking lever for on/off switch
A) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
GWX 18V-10 PC
3 601 GB0 7..
V=
-1
min
-1
min
mm
®
Low Energy Module
A)
A)
A)
A)
A)
A)
A)
A)
A)
A)
A)
A)
A)
GWX 18V-10 PSC
3 601 GB0 8..
18
9000 9000
– 4500–9000
125
●
●
–
Bosch Power Tools
A)
18
125
●
●
●