Cleaning And Maintenance; Safety Advice; Cleaning - Bartscher IW 35 Mode D'emploi

CAUTION!
Do not place empty cookware on the cooking zone.
Heating empty cookware will activate the unit's overheating protection, a signal will
sound and the unit will turn off.
The digital display will show the error message „E02".
If this happens, remove the cookware from the cooking zone.
Remove the unit's plug from the socket and leave for a few minutes to cool.
After a few minutes the unit will function again without problems.
•
Ensure that the bottom of the pot does not scratch the cooking zone surface, even
though a scratched surface will not negatively impact the unit's functioning.
•
After finishing cooking or heating, remove the plug from its socket (do not
depend on the unit to shut itself off automatically)!

6. Cleaning and maintenance

6.1 Safety advice

o Before beginning with repair or cleaning works make sure the device has been
disconnected from power supply and has cooled down.
o Do not use any acid agents and make sure no water ingresses the device.
o To protect yourself from electric shock, never immerse the device, its cables and
the plug in water or other liquids.
CAUTION!
The device is not suited for direct washing via water jets.
Therefore, you must not use any kind of pressure water jet for cleaning the device!

6.2 Cleaning

o Clean the unit regularly.
o Wash the concave cooking zone and body of the unit with a soft, moist cloth and
delicate cleaning agent.
o Wipe the control panel with a soft cloth and delicate cleaning agent.
o Regularly wash the particle and grease filter with a mild cleaning agent or in the
dishwasher. To wash, remove the filter by pulling it forward (see 4.2 Particle and
grease filter). After washing and drying thoroughly, replace the filter in the unit.
- 30 -