Brita AquaVend Cool Mode D'emploi page 14

7 Troubleshooting
7.1 No water fl ow
Cause: Water intake closed.
Troubleshooting: Open water intake on the upstream stop valve.
Caution: The following faults may be remedied only by trained and authorised
!
personnel.
7.2 No or low water fl ow in spite of open water intake
Cause: Mains pressure too low.
Troubleshooting: Check mains pressure.
If the fault continues to occur in spite of adequate mains pressure
(Chapter 8), check the fi lter system and fi lter cartridge and change
if necessary.
!
the operating and safety information (Chapter 3).
Cause: Filter head not mounted in direction of fl ow.
Troubleshooting: Dismantle fi lter head and install in the direction of fl ow (Chapter 4.1).
!
and the operating and safety information (Chapter 3).
7.3 Leaks
Cause: Connections not fi tted correctly.
Troubleshooting: Check mains pressure. Check all connections and mount according to
Chapter 4.
If the fault continues, exchange fi lter system.
!
the operating and safety information (Chapter 3).
12
All manuals and user guides at all-guides.com
Prior to exchange read the technical data (Chapter 8) and
Caution:
Caution: Prior to dismantling read the technical data (Chapter 8)
Caution: Prior to exchange read the technical data (Chapter 8) and