Cuisinart BFP703CE Instructions page 16

B. The Food Processor
1. PRODUCT DESCRIPTION AND FEATURES
1. Food pusher
2. Bowl lid with feedtube
3. Stainless-steel blade. Chops both raw uncooked foodstuffs as well as
cooked food. Capable of producing any desired consistence, from coarse
chopped vegetable or minced meat to a fine
purée.
4. The reversible stainless-steel grater/slicer disc
enables you to produce perfect slices or grate a
great variety of fruits, vegetables, meats and
cheeses.
5. Spindle for holding disc
6. Preparation bowl
7. Food-processor base
8. Motor unit
Food pusher (1)
Bowl lid with feed tube (2)
Stainless steel chopping blade (3)
Reversible grater/slicer disc (4)
Spindle for holding disc (5)
Preparation bowl (6)
Food processor base (7)
Motor unit (8)
All manuals and user guides at all-guides.com
16
2. HOW TO ASSEMBLE THE FOOD PROCESSOR
A. WITH CHOPPING BLADE
1. Hold the food-proceessor base with one hand and the bowl handle with
the other. Screw the bowl onto the base by rotating it in a clockwise
direction.
2. Place the bowl and base onto the motor unit.
Note: The bowl and food-processor base fit onto the motor unit in 8
different positions. The handle can face forwards or sideways, and the
feedtube can face forwards, backwards or sideways.
3. Fit the chopping blade onto the central stem in the bowl. The blade
should easily sink to the bottom of the bowl and almost touch the bottom
of the bowl.
CAUTION! THE CHOPPING BLADE IS EXTREMELY SHARP
4. Place the food in the bowl. Fit the lid on top by rotating it in a
clockwise direction until it locks into position. There should be
an audible click when it locks into position. If you have difficulty
fitting the lid onto the bowl, give the hub of the blade a slight
turn and re-insert the lid.
5. The food pusher fits into the feedtube, with the roundest side
pointing towards the outside of the bowl. ALWAYS USE THE PUSHER
TO GUIDE THE FOOD THROUGH THE FEEDTUBE. NEVER push with
YOUR FINGERS OR A SPATULA.
6. Plug in and switch on by pressing touch-pad control 1 , then press the
food-processor touch-pad
recommend that you place your hand over the lid of the food processor
while it is operating in order to prevent it from moving. If the machine
does not start up, check that it is plugged in and switched on, and that
the bowl and lid are securely locked in place.
B. WITH THE REVERSIBLE SLICING/GRATING DISC
1. Place the bowl on the food-processor base, then fit this set onto the
motor unit.
2. Fit the disc spindle into the disc.
For slicing: Attach the disc to the spindle with the slicing blade
facing upwards.
For grating: Set the disc on the spindle, with the grater slots
facing upwards. Then place the disc onto the central stem of the bowl.
Important: hold the disc by the rim to avoid any risk of injury.
3. Place the lid on the bowl and insert the food into the feedtube.
4. Place the pusher in the feedtube above the food. Always use the pusher to
guide the food through the feedtube. Never use your hands or a spatula.
5. Plug in and switch on the machine to start grating or slicing.
control to start chopping. We