LaserLiner VideoControl-Master Mode D'emploi page 24

Video output
8.7
Menu
Auto power off
Input source
Length measure
Video output
Delete all
Delete all
8.8
Menu
Auto power off
Input source
Length measure
Video output
Delete all
Instructions for use
– The LCD unit must not be immersed in water.
– The base unit must not come in contact with liquids.
– To maintain the IP65 protection class, the caps on the connections must be firmly locked in.
USB data transfer
Data saved on the SD card can be transferred to PC either with a suitable card reader or directly via the
USB port. Please refer to the manual supplied with your card reader for information about connecting
your card adapter or card reader to a PC.
Changing the battery
Send in the unit to UMAREX-Laserliner for the battery to be changed.
Connecting to a monitor
The VideoControl-Master can be connected to a monitor with the supplied cable. Use connection „g" for this
purpose and select the corresponding video output in the menu, see „8.7 Video Output".
Connect power supply/battery charger
To charge the unit, plug the supplied power supply/battery charger into charging socket „i" and connect
it to a corresponding power source.
24
EN
All manuals and user guides at all-guides.com
Yes
Delete all
No
To use this function, the
VideoControl-Master
must be connected to a
!
monitor. The display on
the VideoControl-Master
is blanked out and the
functions are shown on
the external monitor.
Delete all
Yes No