Télécharger Imprimer la page

Jensen JDV8035 Guide D'utilisateur page 26

Publicité

Les langues disponibles

Les langues disponibles

CARE AND MAINTENANCE
Your new radio/CD/DVD player does not
require any maintenance. However, proper
understanding of its use and handling will help
you obtain maximum enjoyment of its
capabilities. We recommend that you keep this
manual for reference on the many features of
this unit as well as how to set the clock. The
following points should be observed:
When cleaning the interior of the vehicle,
do not get water or cleaning fluids on the
unit.
The CD/DVD player is a precision
instrument and will not operate properly in
extreme heat or cold. If such conditions
occur, wait until the interior of the vehicle
reaches a normal temperature before using
the player.
If the temperature inside the player gets too
hot, a protective circuit will automatically
stop play of the disc. In this case, allow the
unit to cool before operating the player
again.
Never insert anything other than a 5" (12
cm) disc into the player as the mechanism
can be damaged by foreign objects.
Do not attempt to use 3" (8 cm) CD-Single
discs in this unit, either with or without an
adaptor, as damage to the player and/or
disc may occur. Such damage will not be
covered by the Warranty on this product.
When not using the disc player, always
remove the compact disc. Do not leave an
ejected disc sitting in the disc slot as this
can expose it to sunlight and other causes
of damage.
Do not attempt to open the unit chassis.
There are no user-serviceable parts or
adjustment points inside.
When the vehicle warms up during cold
weather or under damp conditions,
condensation may appear on the lens of
the disc player. Should this occur, the
player will not operate properly until the
moisture has evaporated.
The unit is designed with a vibration
dampening disc mechanism to minimize
interruption of disc play due to normal
vibration. When driving on rough roads,
however, occasional sound skips may
occur. This will not scratch or damage the
disc and normal play will resume when the
rough conditions cease.
Handling Compact Discs
Dirt, dust, scratches and warping can cause
skips in the playback and deterioration of sound
quality. Please follow these guidelines to take
care of your compact discs:
Carefully wipe fingerprints, dust and dirt
from the disc's playing surface with a soft
26
cloth. Wipe in a straight motion from the
center to the outside of the disc.
Never use chemicals such as record sprays
or household cleaners to clean discs, as
they can irreparably damage the disc's
surface.
Discs should be kept in their storage cases
when not in use.
Do not expose discs to direct sunlight, high
temperatures or high humidity for long
periods.
Do not stick paper, tape or labels on disc
surfaces.
RESET BUTTON
A Reset button is located behind the
faceplate near the center of the unit (the
front panel must be removed to access the
button). The Reset function should only be
activated under the following circumstances
as it will erase the time and pre-set
memories: Upon initial installation after all
wiring is completed ; If there is a
malfunction of any of the switches on the
unit, pressing the Reset button may clear
the system and return to normal operation.
JDV8035

Publicité

loading