Jensen JDV8035 Guide D'utilisateur page 16

TUNER OPERATION
AM/FM Band Selector (BAND)
Press the B/BAND button (20) to change
between three FM and two AM bands. Each
band stores up to six preset stations.
Manual Tuning
Press the tune/track |||< button (18) to manually
tune the radio station higher or press the tune/
track >||| button (19) to tune the radio station
lower.
Seek Tuning
Press and hold the tune/track |||< button (18) to
seek tune the radio station higher. Press and
hold the tune/track >||| button (19) to seek tune
the radio station lower.
Preset Stations
Up to six stations on each band can be stored
as presets, which can then be instantly recalled
by pressing the associated preset button (5, 6,
10, 11, 14, 17). To store a station, turn the radio
on and select the desired band and station.
Press and hold a preset button (numbered one
through six on the face of the radio) for more
than two seconds. When stored, the preset
number (CH1 - CH6) appears on the display.
The station can now be recalled by pressing the
corresponding preset button. Repeat for the
remaining five presets on the current band and
for presets on the other four bands.
Preset Scan
Press the AS/PS button (15) to scan and play
each preset station for 5 seconds each. Press
AS/PS again to stop preset scan.
Automatic Preset Store
Press and hold the AS/PS button (15) to select
six strong stations and store them in the current
band using the AUTO PRESET feature. The
radio will automatically scan the current band
and enter strong stations into the preset
memory positions. When using the AUTO
PRESET feature, the new stations replace any
stations already stored in preset memory.
NOTE: You can stop the AUTO PRESET
function at any time by pressing the AS/PS
button again.
Mono/Stereo Reception
During FM radio operation, the JDV8035 will
automatically pickup a stereo signal, when
available ("ST" appears on the display). When
no stereo signal is available, the unit
automatically reverts to mono operation.
16
JDV8035