Publicité
Les langues disponibles
Les langues disponibles
Bass Quality Factor Curve Characteristics
Middle
To adjust Mid-Range options, press the rotary
encoder (4) repeatedly until "Middle" appears in
the display. Continue pressing the rotary
encoder to access the following Mid-Range
settings:
•
LEVEL
Turn the rotary encoder clockwise to
increase or counter-clockwise to decrease
the Mid-Range level from "-6" to "+6". "00"
represents a flat response.
•
Mid-Range Center Frequency (C.Frq)
Turn the rotary encoder to adjust the Mid-
Range Center Frequency to 500Hz, 1KHz,
1.5KHz, or 2.5KHz.
•
Mid-Range Quality Factor (BassQ)
Turn the rotary encoder to select one of the
following Mid-Range Quality Factor
options: 2N, 1N, 1W, 2W. The following
chart depicts the curve characteristics for
each step:
Middle Quality Factor Curve Characteristics
3
10 11
12
13
4
6
14
1
15 16
14
Treble
To adjust Treble options, press the rotary
encoder (4) repeatedly until "TREBLE" appears
in the display. Continue pressing the rotary
encoder to access the following Treble settings:
•
LEVEL
Turn the rotary encoder clockwise to
increase or counter-clockwise to decrease
the Treble level from "-6" to "+6". "00"
represents a flat response.
•
Treble Center Frequency (Freq)
Turn the rotary encoder clockwise to adjust
the Treble Center Frequency to 10KHz,
12.5KHz, 15KHz or 17.5KHz.
2
18 19
9
JDV8035
2 ZONE
5
7
17
JDV8035
8
22
21
20
Publicité
