ETI 53081141 Guide D'utilisation Et D'entretien page 5

Care and Cleaning
CaUTiOn: Before attempting to clean fixture, disconnect the power to the fixture by turning the breaker off or removing the fuse from
the fuse box.
□ Clean the fixture with a soft, dry cloth.
□ Do not use cleaners with chemicals, solvents, or harsh abrasives.
□ Do not use liquid cleaner on the LEDs, LED driver, or wiring inside the light fixture.
Troubleshooting
Before doing any work on the fixture, disconnect power to the light fixture.
WarninG:
Minor problems often can be fixed without the help of an electrician.
Problem Possible Cause
The fixture will not light. The power is off.
The circuit breaker is off.
There is a bad connection.
There is a defective switch.
The fuse blows or the circuit breaker The wires are crossed or the power
trips when the light is turned on.
wire is grounding out.
Questions, problems, missing parts?
Call ETi SSL Customer Service
9 a.m. – 5 p.m., EST, Monday - Friday
1-855-ETI-SSLI (1-855-384-7754)
Retain this manual for future use.
Solution
Ensure the power supply is on.
Ensure the circuit breaker is in the on position.
Check to ensure proper wire connections are made.
Contact a qualified electrician.
Contact a qualified electrician.
Check the wire connections.
Contact a qualified electrician or call customer
service 1-855-384-7754.
WWW.ETiSSL.COM
GUide d'UTiLisaTiOn eT d'enTreTien
LUMinaire enCasTrÉ de 8 PO
Questions, difficultés, pièces manquantes?
Téléphonez au service à la clientèle d'ETi SSL
9 h à 17 h, HNE, du lundi au vendredi
1-855-ETI-SSLI (1 855 384-7754)
Nous apprécions la confiance que vous avez accordé à la ETi Solid State Lighting, Inc. en achetant de ce luminaire encastré de modernisation.
Visitez-nous en ligne pour voir notre gamme complète de produits. Nous vous remercions d'avoir choisi ETi!
item n° 53081141
WWW.ETiSSL.COM
MeRCI