ETI 53081141 Guide D'utilisation Et D'entretien page 3

Pre-installation (continued)
PACKAGe CONTeNTS
A
B
Part description
A LED Downlight
B Wire Connector
installation
Before beginning assembly, installation or operation of product, make sure all parts are present. Compare parts with the package
contents list. If any part is missing or damaged, do not attempt to assemble, install or operate the product. Contact customer service for
replacement parts.
Select a suitable location that can support the weight of the LED downlight.
quantity
1
2
4
install with Junction Box
1
Turning off the power
□ Make sure the power is turned off at the source to the
junction box where the LED downlight (A) will be installed.
Remove the recessed can and open the junction box cover.
Junction
box cover
3
Connecting the wires
□ Connect the wires from the LED downlight (A) as follows:
- Connect black wire to "L" of driver
- Connect white wire to "N" of driver
- Connect brown wire to "+" of dimmer
- Connect blue wire to "-" of dimmer
2
Feeding metal conduit
□ Put metal conduit of LED downlight (A) through cutout in
ceiling.
□ Remove appropriate knockout on the junction box and feed
conduit through the knockout hole.
Metal
conduit
4
Closing the junction box
□ Replace the junction box cover
5 WWW.ETiSSL.COM
Please contact 1-855-384-7754 or further assistance.