Stihl HS 86 Notice D'emploi page 11

English
Cutting season
Observe all country-specific and local
regulations and ordinances regarding
hedge trimming.
Do not use your hedge trimmer during
other people's rest periods.
Cutting sequence
Use lopping shears or a chainsaw to cut
out thick branches first.
Cut both sides of the hedge first, then
the top.
10
All manuals and user guides at all-guides.com
Cutting techniques
Vertical cut:
Swing the cutting blade from the bottom
upward in an arc – lower the nose of the
blade, move along the hedge and then
swing the blade up again in an arc.
Horizontal cut:
Hold the cutting blade at an angle of 0°
to 10° as you swing the hedge trimmer
horizontally.
Swing the blade in an arc towards the
outside of the hedge so that the cuttings
fall to the ground.
Cuttings can be conveniently swept off
the hedge with the aid of the catcher
plate on the cutting blade (special
accessory).
HS 86 R, HS 86 T