Renkforce 1285921 Mode D'emploi page 48

"Configuration"
"Playback Setup"
Here, you can choose if the track is to be repeated individually at playback or if all tracks
are to be repeated, or if you want to play the tracks in random order.
"DLNA Setup"
Here, you can change the name of the internet radio for the DLNA function. Proceed as for
the password input in chapter 9 (Initial setup).
"Equaliser"
Here, you can choose between different equaliser configuration. These settings can also be
switched through directly during playback with the C23 button (EQ). You have the following
selection and order: Normal, Flat, Jazz, Rock, Soundtracks, Classical, Pop, News
"Resume When Power On"
Here, you can select if playback is to be continued automatically or not.
"Software Update"
Once you open this menu item, the internet radio checks if new software is available. If this
is the case, the display will show this. You can then start the update.
"Reset to Default"
In this menu item, you can reset the radio to factory settings. After you have chosen an item,
you need to confirm with "YES" or "NO".
"Local Radio"
This menu item in the main menu is the same one as in the menu "Internet Radio", except that you can
select it directly.
"My mediaU"
This function will only be visible when you enable it in the item "Manage my mediaU", which is found in the
menu "Configuration". For this, observe chapter 10 h) of these instructions.
48