Renkforce 1285921 Mode D'emploi page 46

"Configuration"
"Date&Time"
"Alarm"
"Language"
Here, you can choose your desired menu language. The following languages are supported:
English; German; French; Portuguese; Dutch; Danish; Polish
"Dimmer"
46
"Set Time Format"
Select the time format 12 or 24 hours here.
"Set Date Format"
Select the desired format for the date here. You have the following options: MM/DD/
YYYY (month/day/year) (standard); YYYY/MM/DD (year/month/day); DD/MM/YYYY
(day/month/year)
"Alarm 1 (Turn Off)"
Here, you can make the configuration for the first alarm time. See chapter 10 g) of
these instructions on how to proceed in detail.
"Alarm 2 (Turn Off)"
Here, you can make the configuration for the second alarm time. For this, observe
chapter 10 g) of these instructions again.
"NAP Alarm (Turn Off)"
In this menu item, you can choose the time during which the radio is to wake you up.
However, the only alarm sound available here is a bleep. You can set the time to 5,
10, 20, 30, 60, 90 and 120 minutes.
"Alarm Volume"
Set the alarm volume here. This applies to all functions of the device.
"Power Saving"
When opening this parameter, set the desired brightness and confirm with "Enter"
(C13/A8) on the remote control, the display will be dimmed to your pre-set brightness
once the radio switches to power savings mode.
"Turn On"
Here, you can set the brightness of the display for normal operation. To accept the
configuration, you need to confirm with the button C13/A8 after choosing the bright-
ness.