Ingersoll Rand powerforce PF900 Manuel D'utilisation Et D'entretien page 2

WARNING
Always wear eye protection
when operating or perform-
ing maintenance on this tool.
90 psig maximum at tool inlet.
•
HSound Level
Model
Pressure
PF900 91
Tested in accordance with PNEUROP PN8NTC1.2
H
♦ Tested in accordance with ISO8662- - 1
Low Power Erratic Action
X
X X
X X
All manuals and user guides at all-guides.com
WARNING SYMBOL IDENTIFICATION
Read this manual before
operating tool.
LUBRICATION
INSTALLATION
Main Line(s) Inner Ø
to be 3X Size of
Air Tool's Inlet Ø
To Air
System
To Air
Tool
L
Emergency
Shut--Off
Valve
Lubricator Regulator
FRL
Drain Regularly
SPECIFICATIONS
♦Vibrations
dB (A) Level
2
Power m/s
104 5.2
TROUBLESHOOTING
Blows Air /
Too Noisy
Won't Run
X
X
WARNING
Lubrication - - Inject approximately 1.5 cc of
•
Powerforce No. 50 Oil into the air inlet before
starting the tool and after each two or three hours
of operation, unless the air line lubricator is used.
Lubricate with 1.5 cc of Powerforce No. 50 Oil
before storage.
Branch Line(s) Inner Ø
to be 2X Size of
Air Tool's Inlet Ø
R
F
Filter
Compressor
(Dwg. TPD905- -2)
Inlet
Connection
Thread Type
1/4" NPT
Causes and Solutions
Check air pressure.
X Check for water in lines.
X Oil tool with air tool oil.
2
WARNING
Always wear hearing
protection when operating
this tool.
Minimum
Inside Ø
Air Hose
Inches (mm)
1/4 (6.35)