Eversion / Inversion - Kinetec Breva Manuel D'utilisation

The KINETEC Breva provides a motion from 25° of Eversion to 25° of Inversion.
Loosen the button (4).
Position the motor as shown above.
Tighten the button (4).
Position the synchronization bar (33) in its guide (34)
and tighten the knob (35) into the threaded hole on the
shaft.
Setting up the patient.
Adjust the slope of the splint with the button (7),
choose the right position, on the bed or on the
chair.
Adjust the calf support position (1) with the
knobs (2) and (4).
The calf support slope is free.
• Choice of the Eversion/Inversion movement:
- Press and adjust your parameters (see page 7).
- Or select a program
4
Position the Eversion/Inversion footplate as shown.
The Eversion/Inversion Icon label indicates the correct one.
The correct position is indicated by the green indicator (32).
33
(see page 10).
32
34
1
2
4
Possible movements

Eversion / Inversion

32
35
7
15
GB