Publicité
Les langues disponibles
Les langues disponibles
WARNING
• Always use an assistant or mechanical lifting equip-
ment to safely lift and position the plasma television.
CAUTION
• Be careful not to pinch fingers when pushing screen
from the bottom.
Mounting Flat Panel Screen
To Mount Screen With No Tilt or 2° Tilt
3
Hook vertical brackets (B) onto wall plate (A)
using top hooks for no tilt and bottom hooks for 2°
tilt as shown in figure
brackets must be engaged securely onto wall
plate as shown in detail 1, then slowly swing
screen toward wall as shown in figure 3.1.
Screen can be adjusted horizontally if desired as
shown in figure 3.4.
To Mount Screen With 5° or 10° Tilt
Remove wall support brackets and screws from
vertical brackets as shown in figure 3.2.
vertical brackets (B) onto wall plate (A) using top
hooks for 5° tilt and bottom hooks for 10° tilt as
shown in figure 3.3.
must be engaged securely onto wall plate as
shown in detail 1, then slowly swing screen
toward wall as shown in figure 3.1.
Screen can be adjusted horizontally if desired as
shown in figure 3.4.
2° TILT
FLAT
fig. 3.3
Removing Flat Panel Screen
4
To remove screen from mount, slowly swing
bottom of screen away from wall and slightly
push top of screen toward wall to disengage
hooks on vertical brackets (B) from wall plate (A).
Lift screen off of wall plate as shown in figure 4.1.
Visit the Peerless Web Site at www.peerlessmounts.com
All manuals and user guides at all-guides.com
3.3. Hooks of vertical
Hook
Hooks of vertical brackets
10° TILT
5° TILT
B
A
DETAIL 1
B
fig. 3.2
A
fig. 4.1
9 of 27
For customer care call 1-800-865-2112 or 708-865-8870.
All other brand and product names are trademarks or registered trademarks of their respective owners.
A
fig. 3.1
REMOVE
WALL SUPPORT
BRACKETS AND SCREWS
FOR 5° OR 10° TILT
B
ISSUED: 05-17-07 SHEET #: 202-9208-3 5-7-08
© 2008, Peerless Industries, Inc. All rights reserved.
B
fig. 3.4
Publicité
