Tecfrigo BODEGA 400 Mode D'emploi page 7

Operator's guide:
1)Unpacking instructions
2)The handles
3)Laddered shelving
I
4)"Cave" system
5)Internal cleaning
UK
6)External cleaning
7)Connection to the mains
D
8)Controls
9)Checking correct operation
10)Internal cleaning
E
F
! WARNINGS
It is most important that this instruction booklet is kept together with the appliance both for future
NL
reference and for reasons of safety.
1 . Adults should operate this appliance only. Do not allow children to use the controls or play with it. . It
P
is forbidden to modify in any way the main functions and characteristics of this appliance. . The electrical
installation of the appliance should be carried out by a qualified electrician or other competent person.
S
4. Never attempt to carry out repairs unassisted. Inexpert repairs can cause serious damage and
malfunction. . Assistance has to be provided by an authorized engineer only. Always use original spare
parts. . This appliance is not suitable for the storage of basic commodities not including food-stuffs. 6
DK
7. The manufacturers of this appliance accept no responsibility for the consequences of misuse in
contravention of these safety instructions. It further reserves the right to carry out improvements without
FIN
prior notice. 8
sources of heat (such as radiators, stoves, etc) and drafts (such as windows, doors, ventilation systems,
B
air conditioning, etc ...).
that the products displayed on the shelves and grills do not hang over the edges.
GR
products to be refrigerated should cause ice to form on the evaporator, we recommend stopping the
compressor and placing the goods in special refrigerated containers, kept at the same temperature, until
CZ
defrosting is completed;if this is not carried out the compressor will continue to operate leading to a
wasteful consumption of electricity and poor performance.
it is indispensable to keep the door open at least 10 cm. Avoiding this, you will avoid also the consequent
EE
mildew formation and unpleasant smells.
LV
LT
!
Our products are for internal use only do not install outside restaurants, shops
H
M
1. UNPACKING INSTRUCTIONS
CARDBOARD BOXES 1a. Cut the strap and remove the cardboard package by sliding it upwards.
PL WOODEN CRATE 1b.
appliance. . Remove the pallet or crate. . Insert the two spacers in the holes on the back of the cabinet. 3
5 . Place the appliance on a flat, level surface and make any adjustments with the special foot.
SK
sure there is nothing left in the package before disposing of it. . Sort out the packaging materials in order
to facilitate disposal (see fig. 1).
SLO
2. THE HANDLES
1.
The handles are in a bag inside the cabinet.
already inserted in the holes on the door post; wrench down the screws.
the metal part, pressing it until it clicks into place (see fig. 2).
3. LADDERED SHELVING
1.
The stainless steel bars and the bottle shelves are inside the cabinet. . The bar support guides are
fixed to the inner sides of the cabinet. . Each vertical guide has notches to allow the bars to be fitted in
different positions. . Insert a bar into the vertical side in order to support tilted bottles. . Place the
laddered shelves on the "L" brackets which are fixed to the sides inside the cabinet (see fig. 3).
4. "CAVE" SYSTEM
By means of the "CAVE" system, you can change the position and the inclination of the grids, by simply
repositioning the supports (clips). . Remove the grids, by lifting them off the supports (clips). . Remove
the supports (clips) in the following way: a) unhook the bottom part. b) Turn, by levering on the upper
part. c) Slide out downwards. . Refit the supports (clips) in the desired position.
N.B.:
place only one layer of bottles on each shelf (see fig. 4).
5. INTERNAL CLEANING
1.
Clean the internal surfaces and glass panels with a soft sponge and a neutral detergent
soft dry cloth.
(see fig. 10) (Pag.48)
5
. Avoid installing the cabinet directly in line with sunlight. . Never install the appliance near
10
. Keep the ventilation grills free from obstruction for at least 30 cm.
Insert forks of forklift truck between appliance and pallet or crate. . Lift the
3
4
1
3
Operator's guide
11)Replacement of internal light bulbs
12)Replacement of the door's magnetic gasket
Maintenance manual (Page 49):
1)Cleaning the condenser
2)Wiring diagram diagram of refrigeration unit
13
. If the appliance is not working and unused,
4
7
2.
Fix the metal part of the handle using the two screws
6
3
9
11
. Ensure
12
. If damp air or
2
6.
3.
Apply the plastic insert onto
2
5
2
4. Refit the grids.
. 2
. Wipe with a
2
Make