HUSQVARNA K1 PACE, K1 PACE Rescue and K1 PACE Rail
Vibration levels, a
hveq
1
2
Noise emissions
Husqvarna Fleet Services
Installed arbor bush-
ing diameter, mm/in.
IP class
Torque for blade bolt, Nm/ft-lb
Noise and vibration declaration
statement
These declared values were obtained by laboratory
type testing in accordance with the stated directive or
standards and are suitable for comparison with the
declared values of other products tested in accordance
with the same directive or standards. These declared
Embedded connectivity
Note:
This part is applicable only for products
supplied with embedded connectivity.
BLE technology radio spectrum
Frequency bands for the tool, GHz
Maximum radio-frequency power transmitted, dBm/mW
1
Equivalent vibration level, according to EN 60745-2-22, is calculated as the time-weighted energy total for
vibration levels. Reported data for vibration levels has an uncertainty of 1.5 m/s2. The measurements for K1
PACE Rail were carried out with RA 11 fitted during cutting in concrete as per EN 60745-2-22. When cutting
in steel rail with abrasive blade, the vibration levels may increase significantly.
2
The noise emission are measured in accordance with EN 60745-2-22. Uncertainty for the A-weighted sound
power level K
wA
in steel rail with abrasive blade, the noise emissions are not expected to change significantly.
1598 - 006 - 06.09.2023
K1 PACE 12in. Front, m/s
K1 PACE 12in. Rear, m/s
K1 PACE, K1 PACE Rescue 14in. Front, m/s
K1 PACE, K1 PACE Rescue 14in. Rear, m/s
K1 PACE Rail 14in. Front, m/s
K1 PACE Rail 14in. Rear, m/s
K1 PACE, K1 PACE Rescue LpA, dB(A)
K1 PACE, K1 PACE Rescue LwA, dB(A)
K1 PACE Rail LpA, dB(A)
K1 PACE Rail LwA, dB(A)
™
K1 PACE 12in., K1 PACE 14in.,K1 PACE Rescue, K1 PACE Rail
K1 PACE 12in. UK
is 3 dB(A). Uncertainty for the A-weighted sound pressure level K
2
2
2
2
2
2
values are not suitable for use in risk assessments
and values measured in individual work places may
be higher. The actual exposure values and risk of
harm experienced by an individual user are unique and
depend upon the way the user works, in what material
the product is used, as well as upon the exposure time
and the physical condition of the user, and the condition
of the product.
2.0
1.1
2.2
1.2
2.8
1.7
102
113
101
113
Yes
25.4/1
20/0.8
IPx4
30/18.5
2.402-2.480
4/2.5
is 3 dB(A). When cutting
pA
39