Husqvarna K1 PACE Notice D'utilisation page 23

7. Do a check of the power trigger lockout (B) to make
sure that it operates correctly and that it is not
damaged.
8. Do a check of the control panel (C) to make sure that
it operates correctly.
9. Make sure that all parts and guards are correctly
attached and not damaged or missing.
10. Charge the battery and make sure that it is correctly
attached to the product. Only use Husqvarna PACE
approved batteries for the product.
11. Make sure that the power cutter stops when you
release the power trigger.
To examine the direction of rotation of the
cutting blade
1. Find the arrow on the blade guard that shows the
direction of rotation of the spindle shaft.
2. Find the arrow on the cutting blade that shows the
direction of rotation of the cutting blade.
3. Make sure that the direction arrow of the cutting
blade and the spindle shaft have the same direction.
To do a check of the arbor bushing
The arbor bushings are used to attach the product to the
center hole of the cutting blade. The product is supplied
with arbor bushings that are applicable for 20 mm / 0.79
in. or 25.4 mm / 1 in. center holes.
• Make sure that the dimension of the center hole
of the cutting blade agrees with the installed arbor
bushing. The diameter of the center hole is printed
on the cutting blade.
• Use only HUSQVARNA arbor bushings.
®
Bluetooth wireless technology
Products with built-in Bluetooth
can connect to mobile devices and enables additional
functions from HUSQVARNA Connect.
Bluetooth
The symbol for
on when your mobile device is connected to the product.
1598 - 006 - 06.09.2023
®
wireless technology
®
wireless technology comes
To use embedded connectivity with
Husqvarna Fleet Services
Note:
This part is applicable only for products
supplied with embedded connectivity.
Note:
Radio transmission by the Bluetooth
will be enabled on the first time of connection to a
battery, and stay on after that.
1. Download the Husqvarna Fleet Services
Android app Husqvarna Fleet Services.
2. Go to Husqvarna Fleet Services
fleetservices.husqvarna.com for more information.
To connect the battery charger
WARNING:
charge in ambient temperatures between
5°C/41°F and 40°C/104°F.
1. Connect the battery charger to the voltage and
frequency that is specified on the rating plate.
2. Put the plug in a grounded socket outlet. The LED
on the battery charger flashes green one time.
To connect the battery to the battery
charger
Note:
Charge the battery if it is the first time that you
use it. A new battery is only 30% charged.
Note:
The battery will not charge if the battery
temperature is too high. Let the battery become cool
before the battery charges
1. Make sure that the battery is dry.
2. Put the battery in the battery charger.
3. Make sure that the green charging light on the
battery charger comes on. That means that the
battery is connected correctly to the battery charger.
™
®
function
™
iOS or
™
website https://
Only use the battery
23