Motion Detection - Abus IPCA52010 Manuel Utilisateur

7.10 Schedules
A schedule (24hrs) is pre-programmed into the system. Up to four additional schedules can be
added using the green "+" button. These can be used for event programming or for day/night
switching.
Configure schedule:
7.11 Detectors

7.11.1 Motion detection

Add areas:
Assign a name and mark the desired active time periods (30-minute
slots). Then press "Save".
Up to three areas can be selected for motion detection using
the green "+" button. The size and position of the areas can be
changed in the video preview.
110