Https - Abus IPCA52010 Manuel Utilisateur

7.6.2.5 HTTPS

Enable:
Certificate information:
Select certificate:
Generate self-signed certificate:
activates the HTTPS function. This enables a secure
connection using a connection certificate. Please note that
further steps are required to configure the HTTPS function.
information about the currently installed certificate
install a HTTPS certificate from an external provider. When
accessing the camera at a later point, the connection is
automatically accepted as secure (address bar shows
green).
enter all of the details required for the certificate. When
accessing the camera at a later point, the connection must
also be confirmed in the browser.
88