Image Parameters; Exposure - Abus IPCA52010 Manuel Utilisateur

7.7.2.1 Image parameters

Brightness, saturation, hue, contrast, sharpness:
Adjust these values to suit the ambient conditions.

7.7.2.2 Exposure

In the TRUE WDR mode 2X and 3X, the exposure settings are configured automatically. If this
mode is deactivated, you can either set the values for the shortest and longest exposure, or fix
the exposure time and amplification to a value.
Anti-flicker: enable this function if flickering occurs in the video image. Flickering can be
caused by an unstable network frequency, fluorescent light or gas lamps.
97