Zyxel P-334WT Guide De Démarrage Rapide page 18

Les langues disponibles

PROBLEM

Cannot access the P-334WT

from my computer (continued).

Cannot access the Internet.

4.1 Set Up Your Computer's IP Address

This section shows you how to set your Windows NT/2000/XP computer to automatically get an IP address.

This ensures that your computer can communicate with your P-334WT. Refer to your User's Guide for

detailed IP address configuration for other Windows and Macintosh computer operating systems.

1 In Windows XP, click start, Control Panel. In Windows 2000/NT, click Start, Settings, Control Panel.

2 In Windows XP, click Network Connections. In Windows 2000/NT, click Network and Dial-up

Connections.

3 Right-click Local Area Connection and then click Properties.

4 Select Internet Protocol (TCP/IP) (under the General tab in Win

XP) and click Properties.

5 The Internet Protocol TCP/IP Properties screen opens (the

General tab in Windows XP).

6 Select the Obtain an IP address automatically and Obtain

DNS server address automatically options.

7 Click OK to close the Internet Protocol (TCP/IP) Properties

window.

8 Click Close (OK in Windows 2000/NT) to close the Local Area

Connection Properties window.

9 Close the Network Connections screen.

Viewing Your Product's Certifications

1 Go to www.zyxel.com.

2 Select your product from the drop-down list box on the ZyXEL home page to go to that product's page.

3 Select the certification you wish to view from this page.

ENGLISH

CORRECTIVE ACTION

Use Internet Explorer 6.0 and later or Netscape Navigator 7.0 and later with

JavaScript enabled.

Make sure you enter the password correctly (the field is case sensitive).

If you've forgotten the P-334WT's password, use the RESET button. Press the

button in for about 10 seconds (or until the SYS LED starts to blink), then

release it. It returns the P-334WT to the factory defaults (password is 1234, LAN

IP address 192.168.1.1 etc.).

Verify the Internet connection settings in the wizard. Make sure you entered the

correct user name and password if you are using PPPoE or PPPoA.