LG PRADA P940 Mode D'emploi page 551

All manuals and user guides at all-guides.com
Wi-Fi connection for both device
and PC, with same wireless router:
• Device configuration
1. From your device, select
settings > wireless &
networks > wi-fi settings
and enable the wi-fi.
2. From the list of Wi-Fi network
searched, select a network to
connect.
3. You may need to enter the
password if the network is
secured.
4. From your device, select
settings >Connectivity >
enable the wi-fi Connection.
• PC configuration
Go to network Configuration.
1.
2. Make sure that the PC is
connected to the same
network to which the device is
connected.
How to connect with Hotspot:
• Device configuration
1. Select settings > wireless &
networks > portable hotspot
> enable the portable wi-fi
hotspot to configure the Wi-Fi
Hotspot.
2. From the portable wi-fi
hotspot settings > Configure
wi-fi hotspot, remember
the SSID information of the
network.
• PC configuration
1. Go to network Configuration.
2. Make sure that the PC is
connected to the same
portable hotspot.
please read the above and
follow the procedures below.
1. Click on the top of the
screen.
2. Then select Wi-Fi connection.
3. Please follow the instruction on
Connection Wizard.
4. Device storage section will be
created in the library section on
the left side of the screen and
the device will be connected.
8