Ezviz C2C Guide De Prise En Main page 8

Operations
Step 1
Starting the Camera
Connect the camera to the power adapter with a USB cable, and connect the power adapter to the
power socket. When the indicator flickers red and blue, the power is connected properly.
USB Cable
Step 2
Quick Settings
1
Registering an EZVIZ Account
- Connect your mobile phone to Wi-Fi.
- Download the EZVIZ International app by searching the "EZVIZ" in App Store and Google
Play .
TM
- Start the app and register for an EZVIZ user account following the start-up wizard.
2
Adding Camera
- Log in the EZVIZ International app.
- Scan the QR Code on the bottom of the camera or on the Quick Start Guide cover and
follow the prompts to add the camera and set the Wi-Fi. (Locate the camera within 3
meters from the router when setting the Wi-Fi.)
To connect to another Wi-Fi, press the RESET button on the camera for 3 seconds to
restart the camera, and reconnect the Wi-Fi when the indicator flickers red and blue.
Installation
1
Installing the Metal Plate (Optional)
Select a clean and flat wall, and secure the metal plate to the desired position with the foam
stickers or screws (not supplied.)
For a piece of magnet is built in the camera, you can skip the step if the installation place is
metallic.
2
Installing the Camera
Secure the camera magnetically to the metal plate or metal
surface (see figure on right).
3
Completing Installation
Adjust the camera angle as required.
All manuals and user guides at all-guides.com
5
Power Socket