Meteotime Fiesta - Weather Info Center
6.8 Switch day weather information
• The device is able to automatically switch to the day-weather and night-
weather respectively. The user can press the [DAY/NIGHT] button to see the
day-weather (for 10-second period) if currently show the night-weather or
vice versa.
• Press and hold the [DAY/NIGHT] button for 3 seconds to enter into auto cir-
culation display mode
.
6.9 Critical weather information (see appendix)
• The Meteotime weather signal contains critical weather information such as:
Gust, frozen, rain, heavy snow, thunder, strong UV, dense fog, bise, mistral,
etc. for today and the coming three days. In this case a warning symbol
for critical weather conditions will be activated.
• Sometimes there are more than one critical weather information in the 4-
days. Press the [DAY/ NIGHT] button to read the critical weather information
one by one. The special icon of the day will flash when you read the infor-
mation.
28
night weather information
Meteotime Fiesta - Weather Info Center
• If no button is pressed, the critical weather information will be displayed, so as
to make sure you are aware of the critical weather details.
7.
Weather symbols (see appendix)
• There are total 15 weather symbols for day and 15 weather symbols for night.
8. Reception of the outdoor transmitter
• After receiving the time and weather data, the measured values from the out-
door transmitter are transmitted to the base station and the search signal will
be flashing.
8.1 Additional outdoor transmitters
• As a replacement or additional transmitter for your weather station METEO-
TIME FIESTA you can use the transmitter (Cat. 30.3127).
29