TFA Meteotime Fiesta Mode D'emploi page 12

Meteotime Fiesta - Weather Info Center
Important information on product safety!
• Do not place your product near extreme temperatures, vibrations or shocks.
• The outdoor transmitter is protected against splash water, but is not water-
tight. Choose a shady and dry position for the transmitter.
5. Elements
Basic station (Receiver)
Display (Fig. 1):
A: First display section
A 1: Reception indicator for radio controlled time
A 2: Reception indicator for weather information for today
A 3: Symbols for activated alarms
A 4: Time and date / cities / setting of alarms / critical weather information
description
B: Second display section
B 1: Weekday for today
B 2: Day/Night symbol
B 3: Weather forcast for today
B 4: Wind direction and strength for today
B 5: Probability of rain for today
B 6: Maximum temperature (today) / minimum temperature (tonight)
B 7: Reception indicator for Meteotime signal
(will be flashing during the reception test)
B 8: Reception symbol and channel symbol for outdoor temperature with
tendency
B 9: Symbol for indoor temperature, indoor temperature with tendency
C. Third display section
C 1: Day 2, 3 and 4 weekday
C 2: Day 2, 3 and 4 day/night symbol
C 3: Day 2, 3 and 4 weather forecast
C 4: Day 2, 3 and 4 reception indicator for weather data
C 5: Day 2, 3 and 4 maximum temperature (day) / minimum temperature
(night)
D: Housing (Fig. 2):
D 1: Wall mount hole
D 2: Battery compartment
D 3: Stand (foldout)
22
Meteotime Fiesta - Weather Info Center
E: Buttons (Fig. 2):
There are total 7 buttons on the basic station:
E 1: [DAY/NIGHT] button
• Critical weather information ↔ Day/Night weather status change
• Press and hold this button for 3 seconds to enter into auto circulation display
mode .
E 2: [CHANNEL] button
• Read outdoor temperature of channels 1, 2 and 3
• Press and hold this button for 3 seconds to enter into auto circulation display
mode .
E 3: [MEM] button
• Show the maximum and minimum measured temperature readings
• Press and hold this button for 3 seconds to clear all the Max. and Min.
records
E 4: [SET] button
• Time and date → city → W-ALM → S-ALM → P-ALM
• Press and hold this button for 3 seconds to select your <1> Country, <2> Time
Zone, <3> Language
[TEST ✔] button
E 5:
• Find the place for the best possible reception
• Add the city into the list of your desired cities
OR
• Remove the city out of the list of desired cities
• Edit your home town
E 6: [▲] button
• Increasing of the value during setting
• Turn ON the alarm (OFF → ON)
• Press and hold this button for 3 seconds to enforce a radio controlled clock
DCF signal search
• Switch to next days' weather information
E 7: [▼] button
• Decreasing of the value during setting
• Choose one of the pre-selected cities (max. 5)
• Turn OFF the alarm (ON→ OFF)
• Press and hold this button for 3 seconds to search for an already connected
outdoor transmitter (for a new outdoor transmitter press the button again
for three seconds)
23