Christopeit Sport BG 3 Notice De Montage Et D'utilisation page 11

Assembly Instructions
Before start assembly read the Important recommendations and
safety Information. Check roughly the completeness of item
based on assembly steps. This item is large pre-assembled as
possible. Assembly time: 15 min.
Step 1:
Attach the front foot (2) at main frame (1).
1. Remove all parts from packaging and place on the floor for an
easy overview.
2. Unfold the front foot (2) from main frame (1) and secure the
position with handgrip screw (18).
3. Lift up the back rest (6) from main frame (1) and place the incline
adjustment (9) into desired position of main frame (1) and the
secure with safety pin (14).
(Attention: Folding in and out of front foot needs special
attention and very carefully move, because of squeezing
danger.)
If you want to fold in to save space, turn out the handgrip screw
(18) and fold in the front foot (2). Then take out the safety pin
(14) and lay down the back rest (6) onto main frame (1).
Step 2:
Attach the rear foot (3) and round pad holder (25) at main frame (1).
1. Put the rear foot (3) into holder of main frame (1) and screw tightly
by using screw (11), washers (12) and nuts (13).
2. Attach the leg pad holder (4) at appropriate position at front foot
(2) by using handgrip screw (18).
- 11 -