JOLT JOLTboots Mode D'emploi page 46

CHAPTER 2 : INSTALLATION AND
OPERATING INSTRUCTIONS
2.1 Connections before use
Power supply
220V-240V or 100V-120V
Before use : Check the battery level by turning on the power
switch on the front of the control unit (the symbol «I» turns the
device on). If the control unit does not turn on, it means the
battery is discharged, so plug in the charger before using.
A) Hose connection for single sleeve use: connect the one
end of the «connection hose» to the «connection port» of the
control unit and the other end to the sleeve.
46
Connecting hoses
Control unit
Compression boots