SilverCrest SWK 3000 EDS B2 Mode D'emploi page 37

Troubleshooting
GB
Disposal of the appliance
Notes on the Declaration of Conformity
34
Problem
The plug is not inserted into
a mains power socket.
The appliance
The appliance is not
does not function.
switched on.
The appliance is over-
heated and the overheating
protection is active.
The kettle is not on the
The ON/OFF
base 3.
switch 2 does
not engage.
The appliance is defective.
Do not dispose of this appliance in your normal domestic waste.
This product is subject to the provisions of European Directive
2012/19/EU.
Dispose of the appliance through an approved disposal centre or at your com-
munity waste facility. Pay heed to the currently applicable regulations. In case of
doubt, consult your local disposal facility.
This appliance complies, in regard to conformance with basic
requirements and other relevent regulations, with the EMV
Directive 2004/108/EC, as well as the Directive for Low
Voltage Devices 2006/95/EC.
The complete original Declaration of Conformity can be
obtained from the importer.
Cause
Insert the plug into a
mains power socket.
Switch the appliance on.
Allow the appliance to
cool down.
Place the kettle on the
base 3.
In this case, contact
Customer Services.
Remedy
SWK 3000 EDS B2