Remote Controller (Rm-Rk241); Main Elements And Features - JVC EXAD KD-AVX11 Manuel D'instructions

Basic operations —
Installing the lithium coin battery (CR2025)
If the range of effectiveness of the remote controller
decreases, replace the battery.
Before using the remote controller:
• Aim the remote controller directly at the remote
sensor on the unit.
• DO NOT expose the remote sensor to bright light
(direct sunlight or artificial lighting).
The unit is equipped with the steering wheel
remote control function.
• See the Installation/Connection Manual (separate
volume) for connection.
Warning:
To prevent accidents and damage
• Do not install any battery other than CR2025 or
its equivalent.
• Store the battery in a place where children
cannot reach.
• Do not recharge, short, disassemble, or heat the
battery or dispose of it in a fire.
• Do not leave the battery with other metallic
materials.
• Do not poke the battery with tweezers or similar
tools.
• Wrap the battery with tape and insulate when
throwing away or saving it.

Remote controller (RM-RK241)

Main elements and features

EXTRA MONITOR
1
Monitor control buttons
• Used for a JVC monitor—KV-MR9010, or KV-
DVD/RECEIVER
2
• Turns on the power.
• Attenuates the sound if the power is on.
• Turns off the power if pressed and held (while
3
Selects the source.
4
Selects the TUNER/DAB bands.
5
Changes the aspect ratio of the playback
pictures.
6
Not used for this unit.
7
Adjusts the volume level.
• Not used as 2nd VOL button for this unit.
8*
1
• DVD/DivX 6: Shows the disc menu.
• VCD: Resumes PBC playback (☞ page 21).
9*
1
Not used as SETUP button for this unit.
p
SHIFT button
8
EXTRA MONITOR
MODE ASPECT MENU
DVD / RECEIVER
ZOOM
ATT
SOURCE
BAND
DIRECT
DUAL ASPECT
1 2
DISC +
VOL
TOP M MENU
4 5
2nd VOL
ENTER
7 8
DISC –
SETUP RETURN
0 SURROUND
SHIFT
MH6510.
the power is on).
OSD
3
6
9