External Input - JVC EXAD KD-AVX11 Manuel D'instructions

Menu items
AV Input
9

External Input*

Beep
Telephone Muting*
Initialize
* 8
Reverse lamp lead connection is required. See Installation/Connection Manual (separate volume). The rear view
through the camera appears on the monitor in "Full" aspect ratio (regardless of the aspect ratio setting) when you
shift the gear to the reverse (R) position.
9
* Cannot be selected if the source is "CD-CH," "iPod," "D.PLAYER," or "EXT-IN."
* 10
The name of the component detected through the CD changer jack is shown.
* 11
The TEL MUTING lead connection is required. See Installation/Connection Manual (separate volume).
Selectable settings, [reference page]
You can determine the use of LINE IN and VIDEO IN plugs.
Off : Select when no component is connected ("AV-IN" is skipped while
selecting the source).
Audio&video : Select when connecting an AV component such as a
VCR.
Audio : Select when connecting an audio component such as a digital
audio player.
8
Camera* : Select when connecting the rear view camera.
Camera Mirror*
the monitor. (The monitor on the unit only; the normal rear view
appears on the external monitor.)
When connecting an external component to the CD changer jack on the
rear.
Changer/iPod/D. Player*
External Input : Any other than the above. ☞ [36]
• For connecting the Bluetooth adapter/DAB tuner, this setting is not
required. It is automatically detected.
Off : Cancels.
On : Activates the key-touch tone.
11
Off : Cancels.
Muting1, Muting2 : Select either one which mutes the sounds while
using the cellular phone.
Initialize all settings you have made in <AV Menu>. Press ENT, then
reset the unit (☞ page 3).
8
: The mirror image of the rear view is displayed on
: CD changer, iPod, or D. player ☞ [30, 35]
10
44