Using The Bluetooth Cellular Phone - JVC EXAD KD-AVX11 Manuel D'instructions

Deleting a registered device
1
Select "Bluetooth Phone" or "Bluetooth
Audio," then select a registered device you
want to delete.

Using the Bluetooth cellular phone

POWER]ON
Adjust the
* 3
volume
~
Select "Bluetooth Phone."
Ÿ
Enter the <Bluetooth> menu.
!
Establish the connection with a device,
then make a call (or settings using the
<Bluetooth> menu).
☞ pages 39, 46 – 48
When a call comes in...
Name and phone number (if acquired)
• The source is automatically changed to
"Bluetooth Phone."
2
Perform steps 2 and 3 on page 24, then...
• Select <Delete Pair>, then <Yes>.
Connected device
Bluetooth icon
1
*
lights up when the adapter is connected.
name
Bluetooth Phone
Connected Device Name
Status of the device
Signal strength/Battery remainder
Each time you press 5 ∞, the registered device name
* 1
(and "NEW DEVICE" when a new device can be registered)
appear in turn.
* 2
Appears only when the information comes from the
device.
* 3
You can adjust the volume level for "Bluetooth Phone"
without affecting the volume level for other sources.
When <Auto Answer> is activated...
The unit answers the incoming calls automatically.
(☞ page 48)
• When <Auto Answer> is deactivated, press any
button (except
incoming call.
To end the call
Hold any button (except
• You can adjust the microphone volume level. (☞
page 48)
26
FLAT
15: 45
* 2
ATT or +/–) to answer the
ATT or +/–).