Philips HD4686 Mode D'emploi page 13

Descaling the kettle
Regular descaling prolongs the life of the kettle.
In case of normal use (up to 5 times a day), the following descaling
frequency is recommended:
Once every 3 months for soft water areas (up to 18dH).
-
Once every month for hard water areas (more than 18dH).
-
Fill the kettle with water up to three-quarters of the maximum
1
level and bring the water to the boil.
After the kettle has switched off, add white vinegar (8% acetic acid)

to the maximum level.
Leave the solution in the kettle overnight.

Empty the kettle and rinse the inside thoroughly.
4
Fill the kettle with fresh water and boil the water.
5
Empty the kettle and rinse it with fresh water again.
6
Repeat the procedure if there is still some scale in the kettle.
You can also use an appropriate descaler. In that case, follow the
instructions on the package of the descaler.
storage
To store the cord, turn the cord winder in the bottom of the base
-
clockwise (Fig. 15).
replacement
You can buy replacement ilters for your kettle from your Philips dealer
or a Philips service centre. The table below indicates which ilters are
suitable for your electric kettle.
Kettle type
HD4685: 2400W, 1.0 litre
HD4686: 2400W, 1.5 litres
Filter type
8824 990 00000
8824 991 00000
EnglisH
1