Mounting The Doorbell Camera Onto The Door Frame - Marmitek DOORGUARD 450 Guide Utilisateur

Monitor
1
2 3 4
1. Screen
2. Menu button
3. – button
4. + button
5. Playback button
6. Mute button
7. Door-open button
8. Intercom button
Mounting the doorbell camera onto the
door frame.
The doorbell camera is equipped with a wide angle lens.
Even if one is not right for the camera, you will obtain a
good view.
x
Determine the correct height for the camera
x
Drill a hole in the door frame at the height that you
want to mount the doorbell camera.
x
Slide the 4 wire cable through the hole in the door
frame and rain cover.
x
Mount the wall plate onto
the door frame using the
four supplied screws.
x
Install the 4 wire cable
according to the diagram of
doorbell camera back.
the
x
Attach the camera to the rain cover with the screw supplied.
DOORGUARD 450
5 6 7 8 9 10 1 1
12
13
14
9. Volume button
10. Ring tones button
11. Monitor button
12. Microphone
13. Mute Indicate LED
14. Power 'On' LED
15. Loudspeaker
15
120 85cm
50cm
MR HON G
MR HONG
7