Electric Door Opener; Mounting The Camera Doorbell - Marmitek DOORGUARD 470 Guide Utilisateur

3.2

Electric door opener

The electric door opener is optional (Item no. 09774).
The system supports door openers with a Normally Open (NO)
door unlocking method. This means that in the normal state, the dry
contact is open. If the release button is pressed, the open contact will be
closed for a set period of time. (dry contact: the contact will not supply
power to the door opener. If you use the Marmitek electric door opener,
you can use the camera's power for this. If you use another door opener,
please ensure it is possible to use the camera's 12V for this, and that it
does not use more than 0.6A. Otherwise, use a separate power supply for
the door opener.)
3.3

Mounting the camera doorbell

The camera is equipped with a wide angle lens. Even if a visitor is not directly in
front of the camera, you'll still get a good view.
x
Determine the correct height for the camera.
x
Drill a hole through the frame at the height where you want to mount the
doorbell.
x
Attach the mounting plate to the frame using the four screws.
x
Now slide the doorbell's cable through the mounting plate and the hole in
the frame.
x
Then mount the doorbell on the mounting plate, using the included two
screws.
DoorGuard 470 9