Vetus HT1012 Instructions D'installation page 10

3.7 Hoses
3.7.1 General
• Only use hoses which satisfy the standards of:
- DIN EN 853
- SAE 100 R2 AT
• Only use hoses with pressed on couplings.
Vetus hydraulic hoses satisfy the above requirements.
Vetus hydraulic hose is available in any length required.
All Vetus hydraulic hoses are fitted with direct couplings. Angled
connections can be made by using an adjustable elbow joint
(EVW). This ensures that the hose connections are always free
of tension.
3.7.3 Hose choice table (see diagram pages 38 - 39)
From
Pressure connection
pump (P)
Suction connection
pump (Z)
Load-sensing connection
pump (LS)
Drain connection from
the pump (L)
Bow thruster/
stern thruster motor
Bow thruster/
stern thruster motor
Cylinder for mast
lowering system
Anchor windlass motor
10
120101.03
To
Hydraulic tank
Hydraulic tank
Single step or two step
load-sensing control unit
HT1011 or HT1012
Drain connection on
the hydraulic tank
Valve HT1013
Drain connection on
the hydraulic tank
Valve HT1014 or
HT1014NB
Valve HT102311 or
HT102312
3.7.2 Installation
Always fit the hoses using exclusively those hose fittings
and clamps which are supplied with the various hydraulic
components. This ensures the correct connection and
avoids fitting hoses with the wrong diameter.
Check that all hoses have been connected correctly as shown
in the diagrams before taking the system into service.
Fit the hoses in such a way that there is very little risk of external
damage occurring.
Protect hoses which have to pass through a bulkhead with a
lead-through or use special couplings.
Bends must be free of kinks; a kink in the hose restricts the free
flow of the hydraulic oil.
Remarks
System with 2 pumps and/ or powersteering:
Also required: connection kit for two pumps: HT3060
System with pump HT1015, HT1016 or HT1017
System with pump HT1022
-
System with pump HT1015, HT1016 or HT1017
System with pump HT1022
System with pump HT1015SD2, HT1016SD1,
HT1016SD2, HT1017SD1, HT1017SD2 or HT1022SD
BOW55HM, BOW95HM, BOW160HM
BOW300HM
BOW55HM, BOW95HM
BOW160HM, BOW300HM
-
-
Hose
Art. code
HH1020---
FFHOSE38
FFHOSE51
HH0610---
HH0815---
HH1018---
HH1018---
HH0815---
HH1018---
HH0610---
HH0612---
HH0408---
HH0612---
'Power Hydraulics', Hydraulic installation