Télécharger Imprimer la page

Calorex Pro-Pac 30H Manuel D'installation page 4

Publicité

Les langues disponibles

Les langues disponibles

PR0-PAC SYSTEM OWNER INSTALLATION MANUAL
This appliance can be used by children from eight years and above and persons with reduced
physical, sensory or mental capabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning the use of the appliance in a safe way and understand
the hazards involved. Children should not play with the appliance. Cleaning and maintenance shall
Disconnect from the mains supply and wait three minutes before removing panels and
AIR/WATER HEAT PUMPS
MODELS COVERED IN THIS MANUAL
The machines detailed in this manual are specifically designed
for heating potable water. The heat pumps use R134a as a
refrigerant and operate in air temperatures from 7°C to 50°C
providing heated water to 68°C.
As an option machines are available with reverse cycle defrost
which allows the heat pumps to operate in temperatures down
to -15°C.
All units are supplied as a package and have integral safety
devices to protect the heat pump from internal and external
faults. Indicator lamps indicate operating mode. An adjustable
thermostat controls water temperature. Also a 6 minute cycle
IMPORTANT NOTE
Dantherm Ltid is an ISO9001:2000 certified company.
All Calorex heat pumps are CE approved. Heat exchangers within the heat pumps are compliant to WRAS (British Water Regulation
Authority Standards) and listed under UL standards.
4
HEALTH AND SAFETY WARNING
not be made by children without supervision.
commencing work on this machine.
time delay is incorporated. The units are weatherproof and can
be installed either outside or within a ventilated plantroom (as
detailed in section 1 of this manual).
A 12 hour delay timer is incorporated into machines, which
after a power interruption or from initial start up will prevent
the machine compressor(s) from starting for a 12 hour period.
This feature is to protect the compressors from liquid pumping
which can cause internal compressor damage.
SD566251 ISSUE 36

Publicité

loading