Publicité
Les langues disponibles
Les langues disponibles
Starting Your Washer
First Wash Cycle Without Laundry
Before washing clothes for the first time, choose the Normal/
Casual cycle and run it without clothes. Use only HE High
Efficiency detergent. Use ½ the manufacturer's recommended
amount for a medium sized load. This initial cycle serves to
ensure the interior is clean before washing clothes.
Starting Your Washer (NOTES & WARNING)
1 . Press Power Button.
2 . Load your Washer.
3 . Close the door.
4 . Add detergent and additives to the dispenser (see pages
18~19).
5 . Select the appropriate cycle and options for the load (see
pages 20~26).
6 . Press the Start/Pause Button.
7 . The Wash Indicator light will illuminate.
8 . The estimated cycle time will appear in the display.
The time may fluctuate to better indicate the time remaining
in the cycle.
NOTE: The actual time required for a cycle may differ from
the estimated time in the display depending on the water
pressure, water temperature, detergent, and laundry.
9 . Before your washer starts to fill, it will make a series of
clicking noises to check the door lock and do a quick drain.
NOTE:
■ When the cycle is complete, the Door Lock light will go out
and "0" will appear in the display.
■ DO NOT attempt to open the door until the Door Lock light
is off. To add a forgotten item, see "Adding items" section
(page 20).
■ When your Washer is restarted after a pause, expect a delay
of up to 15 seconds before the cycle continues.
■ Pressing Power cancels the cycle and stops your washer.
■ The Wash, Rinse and Spin indicator lights will illuminate
during those portions of the cycle.
Kenmore_Grace_User_03289C_EN_160425(add 699).indd 17
All manuals and user guides at all-guides.com
17
2016/5/26 10:09:33
Publicité
