Télécharger Imprimer la page

Atag WS90274MC Mode D'emploi page 49

Publicité

Les langues disponibles

Les langues disponibles

USE
Changing the colour temperature
Choose the temperature colour of the light from warm to cold.
Press and hold the lighting key. Press the '+' key to make the light
'colder' or press the '-' key to make the light 'warmer'.
Switch on boost setting:
Press and hold the '+' key for approximately 2 seconds.
The boost setting (setting 'b' or 7,8,9) is switched on for 10 minutes.
The display will flash during this period. The original extraction setting
will be reactivated after this period.
• Quickly press and release the '-' key to switch off the boost setting.
Switching on the timer
Press the timer key.
The timer indicator will start to blink.
The cooker hood will switch off automatically after 10 minutes.
Switch off the timer function by pressing a random key (except the
one for lighting).
Note!
If the boost setting has been selected you cannot activate the timer
function.
Clean Air function
The Clean Air function allows you to freshen the air in your kitchen for a
maximum of 24 hours at level 1.
Switch off the cooker hood.
Press and hold the timer key for approximately 3 seconds.
The cooker hood will switch on automatically for 10 minutes every
hour at the lowest speed setting. During extraction the display will
show a fast rotating 'snake'. When the hood switches off after 10
minutes, the display will show a slow rotating 'snake' until the hood
switches on again after 50 minutes.
Switch off the Clean Air function in the meantime by pressing a
random key (except the one for lighting).
EN 7

Publicité

loading