Publicité
Les langues disponibles
Les langues disponibles
EN
4. Use 5mm Hex wrench and M8*65mm screws
to fix the handrail on the left and right sides of
the treadmill's riser.
After the left and right handrails are assembled,
assemble the silicone cover back into its original
position.
5. Schematic diagram of handrail
installation completed.
16
6. Place the safety lock on the
yellow label of the electronic
meter. As shown in illustration.
7. Fix "phone bracket" with two
pieces of ST4.2*22mm bolts on
riser beam.
8. Schematic diagram of phone
bracket installation completed.
The speed of Tablet Mode is 0.6-3Mph. When using this mode,
please start the treadmill with handheld remote control.
Note: Be sure to complete all operations in accordance with the
above requirements. The power supply can be switched on only
after all inspection has completed. Please refer to the following
instructions carefully for treadmill operation and use.
EN
17
Publicité
