Publicité
Les langues disponibles
Les langues disponibles
EN
Remote control installation
Upper cover
Battery cover
1/ Open the back cover of the remote control, press down as shown
in the figure, and then push back to remove the battery back cover;
2/ Use two AAA 1.5V batteries;
32
Speed -
+ Speed
Front cover
Push back
Press down
Battery: two AAA 1.5V batteries
3/ Install the back cover, push forward and press down, as shown in
the figure;
Push forward
4/ After the assembly is completed, press the power switch button
and use Bluetooth to connect the remote control. When the
connection is completed, there will be a "Beep" indicating that the
remote control is successfully connected;
5/ To use the heart rate mode, press the
heart rate button, enter the heart rate
mode, put your finger on the heart rate
detection position of the remote control.
Heart rate monitor
EN
Press down
33
Publicité
