Publicité
Les langues disponibles
Les langues disponibles
Operating mode
MAN:
Operating mode
Adjustment range:
OFF, Auto, ON
Factory setting: Auto
HE pump control
ADA1:
HE pump control
Adjustment range: ON / OFF
Factory setting: OFF
Language
LANG:
Language selection
Selection: dE, En, Fr
Factory setting: En
Unit
UNIT:
Temperature unit selection
Selection: °F, °C
Factory setting: °C
Reset
RESE
Reset function
Security enquiry:
|
40
All manuals and user guides at all-guides.com
For control and service work, the operating mode of the
controller can be manually adjusted. For this purpose, select
the adjustment value MAN in which the following adjust-
ments can be made:
Operating mode
OFF : relay off
Auto : relay in automatic operation
ON : relay on
This option is used for controlling a high-efficiency pump
via a S-Bus / PWM adapter. The power supply of the pump
takes place via the semiconductor relay (R1). For pump speed
control with activated ADA1 option, the relay is switched
on or off (no pulse packets). Temperature dependent speed
information is transmitted via the S-Bus. The relay will remain
deactivated for 1 hour after its switch-off conditions have
been fulfilled (pump protection).
The menu language can be adjusted in this channel.
• dE : German
• En : English
• Fr : French
In this adjustment channel, the display unit for temperatures
and temperature differences can be chosen. The unit can
be switched between °C / K and °F / °Ra during operation.
Temperatures and temperature differences in °F and °Ra
are displayed without units. If the indication is set to °C, the
units are displayed with the values.
By using the reset function, all adjustments will be set back
to the factory settings.
Î To initiate a reset, press button 3
Any previous adjustments will be lost. Therefore, initiating
the reset function is always followed by a security enquiry.
Only confirm the security enquiry if you are sure
that you wish to reset all adjustments to the factory
settings!
Î To confirm the security enquiry, press button 3
(flashing) +
(flashing) +
+
Note:
Always adjust the operating mode back to "Auto"
when the control and service work is completed.
Normal operation is not possible in manual mode.
Note:
Whenever a reset has been completed, the
controller runs the commissioning menu again
(see chap. 3).
Publicité
