oventrop Regtronic BS/2-B Notice D'installation Et D'utilisation page 33

4. Channel overview
4.1 Display channels
Indication of drainback time periods
Initialisation
INIT:
ODB initialisation active
Filling time
FLL:
ODB filling time active
Stabilisation
STAB:
Stabilisation
Indication of collector temperature
COL:
Collector temperature
Display range:
-40 ... +260 °C [-40 ... +500 °F]
Indication of store temperatures
TST:
Store temperatures
Display range:
-40 ... +260 °C [-40 ... +500 °F]
Indication of sensors 3 and 4
S3, S4:
Sensor temperatures
Display range:
-40 ... +260 °C [-40 ... +500 °F]
Indication of return temperature
TR:
Return tempe rature
Display range:
-40 ... +260 °C [-40 ... +500 °F]
All manuals and user guides at all-guides.com
Note:
The displayed values and adjustment channels
depend on which options and functions have
been selected. Only values and adjustment chan-
nels available for the individual settings selected
will appear in the menu.
Indicates the time adjusted in tDTO, running backwards.
Indicates the time adjusted in tFLL, running backwards.
Indicates the time adjusted in tSTB, running backwards.
Indicates the current collector temperature.
Indicates the current store temperature.
Indicates the current temperature of the corresponding
additional sensor (without control function).
• S3 : temperature sensor 3
• S4 : temperature sensor 4
Note:
S3 and S4 will only be indicated if the temperature
sensors are connected.
If heat quantity measurement is active, the temperature at
sensor 4 is indicated as TR.
33 |