Publicité
Les langues disponibles
Les langues disponibles
• Make sure that the cord is not hanging over the edge of the table
or counter, does not touch any hot surfaces or is coming directly
into contact with the hot parts of theappliance. Do not place the
appliance underneath or close to curtains, window coverings etc.
(*)Competent qualified electrician: after sales department of the
producer or importer or any person who is qualified, approved and
competent to perform this kind of repairs in order to avoid all danger.
In any case you should return the appliance to this electrician.
PartS dECriPtion
1
2
4
5
3
PartS fan
1. Front guard
2. Fan blade lock button
3. Fan blades
4. Locknut for the rear guard
5. Rear guard
6. Axle
7. Oscillation pen
8. Speed control knobs
4
6
7
8
BEforE uSE
• Take the appliance and accessories out the box. Remove the
stickers, protective foil or plastic from the device.
• Connect the power cable to the socket. (Note: Make sure the
voltage which is indicated on the device matches the local voltage
before connecting the device. Voltage 220V-240V 50Hz).
uSE
1. Use the speed control knobs to choose the desired ventilation level.
2. For oscillation push down the oscillation pen, Pull the oscillation
knob up and the fan will stop oscillation.
3. Never insert fingers, pencils, or any other object through the guard
when the fan is running.
4. Make sure the fan is placed on a level and stable surface to avoid
falling over.
5. Disconnect the fan before moving it.
MaintEnanCE
1. Unplug the appliance before you start cleaning and before
maintenance.
2. Use a soft damp cloth for cleaning the housing, use some soapy water
to remove stubborn dust. Do not use petrol, thinners or other solvents.
3. Before you store the fan clean it thoroughly, cover with a vinyl bag
and store it on a dry place.
Publicité
