Publicité
Les langues disponibles
Les langues disponibles
Air compressors should be operated
on not more than a 50% duty cycle.
This means an air compressor that
pumps air more than 50% of one
hour is considered misuse, because
Contents of Carton
1 - Air Compressor
2 - Wheels
2 - Shoulder Bolts, 3/8-16
2 - Hex Nuts, 3/8-16
2 - Rubber Bumpers
2 - Screws, 1/4-20 x .75
Tools Required for Assembly
1 - 9/16" socket or open end wrench
1 - 1/2" socket or open end wrench
Unpacking
1.
Remove all packaging leaving
the air compressor on the pallet.
2.
Remove and discard the
(4) screws holding the air
compressor to the pallet.
Screws
It may be
necessary to
brace or support one side of the
air compressor when removing the
pallet because the air compressor
will have a tendency to tip.
3.
Carefully remove the air
compressor from the pallet.
A14123
All manuals and user guides at all-guides.com
DUTY CYCLE
the air compressor is undersized for
the required air demand. Maximum
compressor pumping time per hour is
30 minutes.
ASSEMBLY
Assemble Wheels
brace or support one side of the
unit when installing the wheels
because the compressor will have
a tendency to tip.
1.
2.
provide adequate clearance,
stability or support for pulling the
unit up and down stairs or steps.
The unit must be lifted, or pushed
up a ramp.
Assemble Rubber Feet
1.
2.
10- ENG
It will be
necessary to
Attach wheels with shoulder
bolts and nuts as shown.
Nut
Wheel
Tighten securely. NOTE: The
unit will sit level if the wheels are
properly installed.
The wheels and
handle do not
Attach rubber feet with the
screws provided as shown in
previous figure.
Tighten securely.
Rubber
Feet
Screw
Shoulder
Bolt
Publicité
