Soundcore Spirit Dot 2 Mode D'emploi page 4

• To manually power on, press and hold the multi-function button on both earbuds for 2
seconds until the LED indicators turn white for 1 second.
• To manually power off, press and hold the multi-function button on both earbuds for 8
seconds until the LED indicators turn red for 1 second.
Pairing
True Wireless Stereo Connection
The right earbud will automatically connect with the left earbud when taken out of the
charging case.
LED indicators (Earbuds)
Flashing white
Rapidly flashing white (Primary earbud)
Slowly flashing white (Secondary earbud)
• The right earbud is the primary earbud by default. In TWS mode, place either one of the
earbuds into the charging case, the other one will switch to be the primary earbud.
• When powered on and connected, if either one of the earbuds is out of battery and
powered off, you can keep using the other one.
Bluetooth Pairing with your Device
1. Take earbuds out of the charging case or manually power on the earbuds, wait for 1 to 3
seconds until the LED indicator on one of the earbuds flashes white, then earbuds enter the
Bluetooth pairing mode successfully.
2. Turn on Bluetooth on your device and click "Soundcore Spirit Dot 2" . The LED indicators
on both earbuds will turn white for 1 second when Bluetooth connected.
TWS connecting
TWS connected
EN 02