Publicité
Les langues disponibles
Les langues disponibles
INS TA LL ATI ON
To make sure the minibar is correctly installed it is advisable to:
• ensure it is set on a completely level surface
• guarantee that the refrigeration unit is ventilated by practising opening the door for the
entry and exit of the air as shown in Figure 01.
VENTILATION
The absorption refrigeration system gives off heat and requires a good level of ventilation
and must be placed in a well-ventilated environment. The minibar should be installed in
an environment with an opening to provide the necessary change of air (see Fig. 01) and
under no circumstances should the grills, which provide good ventilation for the appliance,
be covered or blocked. Also remember never to set the unit in an area directly exposed to
sunlight or near other sources of heat. In terms of the inset models, the minibar must be
set into the furniture, making the cooling unit protrude into the air cooling duct, thereby
guaranteeing a minimum section at the entry and exit of air of 240 cm² (see Fig. 01).
ELECTRICAL CONNECTION AND EARTHING
Before connecting the plug to the mains, make sure the mains voltage corresponds to that
shown on the rating plate (located inside the minibar) and that the socket has a normal
earthed system as required by safety regulations for electrical systems. The electrical socket
must also be able to support the maximum power loading of the appliance indicated on
the plate itself.
WARNING!
If the socket is not fitted with an earthed system or if multiple sockets or adapters are used,
the manufacturer shall not be liable for any injuries to persons or damage to property and/
or the minibar itself.
WARNING!
The user must always be able to access the plug.
7
Publicité
