Siemens WF 6 Serie Instructions De Service Et De Montage page 133

All manuals and user guides at all-guides.com
Additional parameters for devices with integrated M-Bus
(not add-on modules)
Primary addresses for heat, cold, impulse 1, impulse 2 L4
Additional parameters for devices with solar adaptation
Share of glycol or brine
Commissioning
• Open the ball valves, switch the heating on and open the radiator valve.
• Check the installation or airtightness and direction o o
• Seal the temperature sensor and o metering element to protect it rom
manipulation.
• Remove the installation cover from the meter housing.
• Note the installation date, the meter numbers, any seal numbers, the old and
new meter statuses.
• Dispose of the used device in accordance with national regulations.
Siemens Building Technologies
Level
L3
A6V10816676_----_d
Display
109 EN