Publicité
Les langues disponibles
Les langues disponibles
RADIO MODE
select radio as plaYing source
■ Open the SOuRCE mEnu and then touch the RADlO icon.
select one radio Band
■ Press the [bAnD] key on the display panel or on the remote control or touch the
[bAnD] icon on the user interface to select one radio band among Fm1, Fm2, Fm3,
Am1 and Am2.
auto tuning
■ Press the []/[] key on the display panel or on the remote control or touch the []/[]
icon on the user interface to seek a higher/lower station. To stop searching, repeat the
operation above or press other keys having radio functions.
note:
■ when a station is received, searching stops and the station is played. if the unit receives
a stereo broadcasting, the indicator light of stereo 'ST' on the TFT or on the lCD display
will be lighted.
manual tuning
■ During manual tuning, the frequency will be changed in steps. Press the []/[] key on
remote control or touch the []/[] icon on the user interface to tune in a higher/lower
station.
S
■ Touch the numeric keypad icon [
radio station frequency numbers.
auto save
■ Only stations with sufficient signal strength will be detected and stored in the memory.
when the monitor is closed, press and hold the [AS/PS] key on the display panel.
■ when the monitor is opened, touch the [AS] icon on the user interface.
■ To stop auto save, press other keys having radio functions.
notes:
■ After auto save, the previous saved stations will be overwritten.
■ The unit has 5 bands, such as Fm1, Fm2, Fm3, Am1, Am2, and each band can store 6
stations; hence the unit can store 30 stations in total.
] and then touch the numeric buttons to input the
12
RADIO MODE
manual save
when one expected radio station has been detected ...
1. Press the [mEm] icon on the user interface and the preset menu will be opened.
2. Press one preset button among P1~P6.
3. lf you want to abort, press the [Exit] button.
previeW scan
■ Preview scan searching is such a process that the searching pauses when a station is
received and then played for 5–10 seconds. After being played, the unit continues the
process until the whole band is detected.
■ when the monitor is closed, press the [AS/PS] key on the display panel.
■ when the monitor is opened, touch the [PS] icon on the user interface. To stop the
process, press other keys having radio functions.
recall the stored stations
■ Press one numeric key among 1 to 6 on the remote control or touch an onscreen station
button to select the corresponding stored station.
local seeKing
■ when lOCAl seeking is on, only those radio stations with strong radio signal could be
received.
■ To open or close lOCAl function, press and hold the [nAV] key on the front panel.
notes:
■ when the local radio station searching is on, the indicator light 'lOC' lights up; where as
the light goes off.
■ The number of radio stations that can be received will decrease after the local seeking
mode is on.
DEUTSCH
ENGL I SH
13
Publicité
